2
This is a 1 inch:1.6 meter replica of my bathroom sink, with fully functional hot and cold levers!
Hit the cold switch and the channel for the relative water is released. The original plan was to have lava in the hot reserve, but after the first trial put the entire wool-based sink up in flames I had to rethink that.
Pistons were used in the back (as shown) to stop and release water when levers were hit. The water flows down the 1x1 faucet down into the basin of the sink. From there it flows down the drain and out the back.
Hit the cold switch and the channel for the relative water is released. The original plan was to have lava in the hot reserve, but after the first trial put the entire wool-based sink up in flames I had to rethink that.
Pistons were used in the back (as shown) to stop and release water when levers were hit. The water flows down the 1x1 faucet down into the basin of the sink. From there it flows down the drain and out the back.
Additional Notes
Minecraft 1.7_02| Progress | 100% complete |
| Tags |
tools/tracking
57448
2
functional-sink
Dski1666
SqueakyMac
Marioood
Teribl2ler
SubarashI
Juuaannn
SpellmakerTheHybrid
Ryderlb09
Skollcraft
MarkSarmite
MazaVili
UNREALMANGO
Create an account or sign in to comment.
I'll get to work on that asap.
I'm trying to think of a way to make that work in the way it should (Up is open, down is closed)
hope u like my idea :)
Unfortunately lava burns through wool and destroyed the entire project. I decided just not to mess with it the second time around