2

Slot Machine

Collectable

Get Embed Code

Forum:
HTML:
Link:
avatar
TheAdjectiveNoun
Level 15 : Journeyman Taco
Ok, so you step up to it. You pay they guy running it, he presses a button, and then you press a button. three dispensers either fire dirt or arrows (50-50 chance). If one fires dirt it activates the next. If the last one fires dirt, it actives a reward dispenser.

Additional Notes

Somebody probably already beat me to building this but I did NOT get it from them.
I am using the texture pack SCII find it here: http://www.planetminecraft.com/texture_pack/scii/
Also, I do not know how to make a MC schematic so don't ask for one
Progress: 100% Complete
Tags:Slot Machine, Redstone, Casino, Gambling, Redstone Device

step 7 : 04/10/2011 12:00:00 pm4/10/11

do not put a pressure plate on the last one. put water (shown in pic captioned "step 7") fill the last dispenser with prizes. Now you're done! the "ready" button wil make the machine ready. the "play" button then will activate the first dispenser (speaking of which, now is a good time to fill the first three half with dirt and half with arrows.)and then so on. if you did not add an R/S NOR latch, connect one button right to the first dispenser.

step 5 : 04/10/2011 12:00:00 pm4/10/11

designate one button for the "ready" button and one for the "play" button. (Note: the "ready button is the one that an operator presses). In the RS NOR latch, choose the correct redstone circuit. (the "ready" button when pressed turns it off, and the "play" button turns it on. hook that circuit up to the first dispenser.

step 6 : 04/10/2011 6:34:06 am4/10/11

put a wooden pressure plate below and forward from the dispenser. hook this one up (underground) the the next dispenser and then that one to the next and that one to the last. see the pic captioned "how one activates the next"


Almost done!

Step 4 : 04/10/2011 6:17:08 am4/10/11

now, repeat that four times, leaving a space in the middle of two (like i did). now make a dispenser right (see pic captioned step 4) and cover the hole in the glass with glass and make a walkway ontop of all of them.

step 3 : 04/10/2011 6:03:21 am4/10/11

now you start to build the slots! as this is hard to explain, please refer to new pics (coming soon) all captioned "step 3" after reading this for further help. Build a 2x3 glass wall with a hole in the center. then, make the wall wrap backwards (now would be a good time to look at a photo)

Step 2 : 04/10/2011 5:57:37 am4/10/11

connect both sides with a button. this will make it so you pay, then an operater presses that button, then you press a button to activate the machine. If you don't want this, forget steps 1 and 2

Step 1 : 04/10/2011 5:55:16 am4/10/11

build an R/S NOR latch in an open area.

Comments : 13

Join us to post comments.

Show Comments

1 - 13 of 13

  • Zeranny
  • Site Moderator
  • Level 43
  • Master Blob
  • April 10, 2011, 7:31 am
Bump one more time without good reason and I will have to take action, we do not allow constant bumping of projects
Edit Reply Delete
bumping? if you tell me what that means and how i am doing it wrong i'll stop but i don't know what you mean by that so i can't stop.
Edit Reply Delete
if you mean updating it, i was doing steps and needed to build another one a take screenshots as i go so it took awile
Edit Reply Delete
  • Zeranny
  • Site Moderator
  • Level 43
  • Master Blob
  • April 10, 2011, 8:52 am
This project has been updated constantly so that it is on the front page.
Make a forum post for any guides if you are going to be posting a lot of updates within a day.
Edit Reply Delete
?????? i was updating it for like a half-hour at the most. during that time i was making instrutions on request. I admit, it was the day after i posted the project. I have not been trying to keep it on the front page, but i stopped like 3 hours ago (at least).
Edit Reply Delete
  • Zeranny
  • Site Moderator
  • Level 43
  • Master Blob
  • April 10, 2011, 6:48 am
Stop bumping this project
Edit Reply Delete
  • Zeranny
  • Site Moderator
  • Level 43
  • Master Blob
  • April 10, 2011, 2:44 am
your update posts seem to be info, please don't use the update log to bump your project and keep it all in one log or in your description.

Thanks,
Zeranny
Edit Reply Delete
  • flaminsnowman99
  • Level 67
  • High Grandmaster Programmer
  • April 9, 2011, 6:08 pm
Can you teach me how to make this?
Edit Reply Delete
Done! idk why step 5 is ontop of step 7 but still go in counting order. make sure to give credit! ty!
Edit Reply Delete
are you familiar with R/S NOR latches? this uses one. and yes, check the update log for directions (coming soon)
Edit Reply Delete
  • flaminsnowman99
  • Level 67
  • High Grandmaster Programmer
  • April 10, 2011, 4:36 am
That is a really good design and a good description how to build it. Thank you, do you mind if I put this in my server?
Edit Reply Delete
no i don't, just don't say it was your origininal idea
Edit Reply Delete
  • flaminsnowman99
  • Level 67
  • High Grandmaster Programmer
  • April 10, 2011, 4:32 am
Thank you and yes I am familiar with them, but they are still somewhat of a new concept. I have started to want to learn about redstone so thanks again.
Edit Reply Delete

1 - 13 of 13

Show Comments