Published Jan 5th, 2022, 1/5/22 6:12 pm
- 2,406 views, 3 today
- 306 downloads, 1 today
70
Information
Lore (Prototype/AU)
With the return of Captain Bellamy and the technology sharing agreement established to allow South Haven's engineers to cooperate with the Lanier in order to produce more advanced warships in order to finish the war came the appearance and proposal of a multitude of prototypes. This moderately armored heavy artillery platform was proposed as the Conquerer-Class Cruiser, or generically the Heavy Cruiser Mk I.
The Heavy Cruiser Mk I was intended to be a warship to bridge the gap in terms of both bulk and firepower that exists between the Battlecruiser Mk Is and the Destroyer Mk IIIs that were proposed for production. The requirements for said ship were similar to that of the Destroyer Mk III in that it should be able to perform all the same tasks such as bombing, ground assault, aircraft carrying, and ship-to-ship combat roles except it must have a higher degree of protection, longer cruising range, and heavier armament.
The first model of the design encountered many issues with the requirements in which heavier armament and armor were difficult to install on a warship of similar size to the Destroyers without compromising the range of the ship or even making it too heavy to fly. This lead to a significant increase in size to accommodate more lifting cells to carry the added bulk. Originally, the ship would have carried four turrets mounting twin guns but in order to save weight, the amount of turrets was reduced to three but mounting three guns in each turret as a triple mount would only weigh marginally more than a twin mount.
The final plans for a new prototype were produced but before it could be constructed, the program had been cancelled. The necessity for a cruiser of its capability while expected, did not become apparent as the destroyers sufficiently bridged the gap themselves proving to be a sufficient and significant force multiplier in combat against the Silver Empire's warships. Funding and resources intended to be allocated to this program were diverted into producing more Battlecruisers and Destroyers and the Conquerer-Class Cruisers remained as a paper ship filed away in the admiralty building.
Please Leave A Diamond If You Enjoyed!
Overview
The idea I had in mind for this ship was an intermediate vessel between the nearly 19,000 block sized Battlecruisers and the 8,000 block sized Destroyers of the Kingdom of Lanier. This cruiser sits roughly between the two in terms of size and is intended to be a more readily available form of strong firepower than the Battlecruisers.
How to Use Weapons
To fire the main gun you use the wooden button on the red wool. You adjust the arc by adding more ticks to the repeater next to it. The more ticks on the repeater the higher the arc of the gun. Levers activate AA guns. The wooden button on the cluster bomb dropper activates the bomb mechanism. Add more propellant in the dispensers on top to increase the spread of the bombs.
Movecraft Compatibility
All weapons on the ship function without the Movecraft plugin as they're Redstone-based. However, if you wish to rotate the turrets and move the ship around, you need the Movecraft plugin.
Specifications:
Plugin Requirements ( None / Optional )
All weapons on the ship function without the Movecraft plugin as they're Redstone-based TNT cannons and firecharge dispensers. However, if you wish to move the ship around, you need the Movecraft plugin. Some servers that run Movecraft are ToTheEnd, Airship Pirates, and Strangelands.
Terms of Use
You may use this build wherever you like but give credit if you plan to upload a modification or use it in a build. Leave a diamond if you like it! Thank you!
Discord Server and SMP Join Info (Bedrock and Java cross play):
Click Here To Join The Discord Server
Lore (Prototype/AU)
With the return of Captain Bellamy and the technology sharing agreement established to allow South Haven's engineers to cooperate with the Lanier in order to produce more advanced warships in order to finish the war came the appearance and proposal of a multitude of prototypes. This moderately armored heavy artillery platform was proposed as the Conquerer-Class Cruiser, or generically the Heavy Cruiser Mk I.
The Heavy Cruiser Mk I was intended to be a warship to bridge the gap in terms of both bulk and firepower that exists between the Battlecruiser Mk Is and the Destroyer Mk IIIs that were proposed for production. The requirements for said ship were similar to that of the Destroyer Mk III in that it should be able to perform all the same tasks such as bombing, ground assault, aircraft carrying, and ship-to-ship combat roles except it must have a higher degree of protection, longer cruising range, and heavier armament.
The first model of the design encountered many issues with the requirements in which heavier armament and armor were difficult to install on a warship of similar size to the Destroyers without compromising the range of the ship or even making it too heavy to fly. This lead to a significant increase in size to accommodate more lifting cells to carry the added bulk. Originally, the ship would have carried four turrets mounting twin guns but in order to save weight, the amount of turrets was reduced to three but mounting three guns in each turret as a triple mount would only weigh marginally more than a twin mount.
The final plans for a new prototype were produced but before it could be constructed, the program had been cancelled. The necessity for a cruiser of its capability while expected, did not become apparent as the destroyers sufficiently bridged the gap themselves proving to be a sufficient and significant force multiplier in combat against the Silver Empire's warships. Funding and resources intended to be allocated to this program were diverted into producing more Battlecruisers and Destroyers and the Conquerer-Class Cruisers remained as a paper ship filed away in the admiralty building.
Lore: (War of Retribution AU)
Lore: (Retribution & Vindication AU)
With South Haven's production of the new Abyssal-Class Battlecruisers, the Royal Navy found that their destroyers proved to lack the durability in a fight against the both heavy and numerous forms of artillery that their foes had to bear. This immediately called for the revival of the Heavy Cruiser program in an effort to face the new threat.
With South Haven's production of the new Abyssal-Class Battlecruisers, the Royal Navy found that their destroyers proved to lack the durability in a fight against the both heavy and numerous forms of artillery that their foes had to bear. This immediately called for the revival of the Heavy Cruiser program in an effort to face the new threat.
Please Leave A Diamond If You Enjoyed!
Overview
The idea I had in mind for this ship was an intermediate vessel between the nearly 19,000 block sized Battlecruisers and the 8,000 block sized Destroyers of the Kingdom of Lanier. This cruiser sits roughly between the two in terms of size and is intended to be a more readily available form of strong firepower than the Battlecruisers.
How to Use Weapons
To fire the main gun you use the wooden button on the red wool. You adjust the arc by adding more ticks to the repeater next to it. The more ticks on the repeater the higher the arc of the gun. Levers activate AA guns. The wooden button on the cluster bomb dropper activates the bomb mechanism. Add more propellant in the dispensers on top to increase the spread of the bombs.
Movecraft Compatibility
All weapons on the ship function without the Movecraft plugin as they're Redstone-based. However, if you wish to rotate the turrets and move the ship around, you need the Movecraft plugin.
Specifications:
- Size: 13149 Blocks Total
- Length: 69 Blocks (69m) nice
- Width: 27 Blocks (27m)
- TNT Cannons: 6x Scattershot Adjustable Arc Cannons Mounted Two Per Turret (3x Turrets)
- Dispensers: 9x Starboard Dual Purpose Ground Attack/Anti-Air, 9x Port Dual Purpose Ground Attack/Anti-Air, 4x Forward, 2x Rear
- Bombs: 8x Automatic Rapid Fire Bomb Dispensers
- Torpedoes: None
- Aircraft: 3x Falcon Air Superiority Fighter, 1x Banshee Torpedo Skiff
Plugin Requirements ( None / Optional )
All weapons on the ship function without the Movecraft plugin as they're Redstone-based TNT cannons and firecharge dispensers. However, if you wish to move the ship around, you need the Movecraft plugin. Some servers that run Movecraft are ToTheEnd, Airship Pirates, and Strangelands.
Terms of Use
You may use this build wherever you like but give credit if you plan to upload a modification or use it in a build. Leave a diamond if you like it! Thank you!
Discord Server and SMP Join Info (Bedrock and Java cross play):
Click Here To Join The Discord Server
| Credit | BaccaYarro - Airship Pirates Lore | Sharthur by RoloFolo |
| Progress | 100% complete |
| Tags |
tools/tracking
5418173
2
royal-navy-heavy-cruiser-mk-i-airship-kingdom-of-lanier-movecraft-compatible
CrystalRuby
MistFaller
BLACKMAGE_NEW_GHOSTE
Sophisticated_Trashcan
GalaxyCat24
pocapka
sjen_2001
Papa Enny
HudSolo2009
BlossomGoldFish
Consue
zytrex
Firecat673
Create an account or sign in to comment.
Jawohl, Achten Sie darauf, Anerkennung zu geben, wenn Sie dies tun, danke!(Google Translate)
btw I uploaded the cannon a while ago
you can view it with schemagic 3D view in PMC