Introduction

Features

• Works in all Vanilla Minecraft versions 1.10+, 1.11+, and 1.12.
  
• 129+ instant structures including:
  • The main factory structure (i.e. the main interface)
    • Compactness: 7x5x7 in the size for itself
      
    • Convenience: All relative position and size settings for the "load-mode" structure blocks are properly set. Follow the guide as described below, and you will understand the way to build the HRT system with this "mod".
      
    
    
  • Straight, diagonal lines, and curves (radius of curvature: 100 blocks) in every rotation
    • With the use of structure void, you may easily extend the roads without any concerns that some previously built parts were to be unexpectedly removed due to boundary problems.
      
    • See also: this showcase video, for how to build up the roads.
      
    • Supports bridges, ground paths, and tunnels
      
    
    
  • The station (the most important part of this tool)
    • 6 types of horse speeds are available, with the maximum speed of 240 KPH (150 MPH).
      
    • Horse remover, the clickable signs on the station platform
      
    • Command-driven elevators
      
    • Really compact: the size is only 11x3x3.
      
    
    
  • Trash can
    
  • [Coming soon] Tree remover command blocks
    
  • [Coming soon] Water/lava remover/replacing commands
    
  
  
• Easy in installation
  

How to install this "vanilla mod"

1. Download and unzip the ZIP file from the download link.
   
2. Copy the entire folder structures/ into your desired world save directory.
   • In Windows, the world save directory is accessible via: %appdata%/.minecraft/saves/YourProjectFolder/
     
   • See also on the official post for other operating systems.
     
   
   
3. Open the world save in Minecraft, and type the following command to get the structure block:
   • /give @p minecraft:structure_block
     
   
   
4. Place the structure block, switch to "load mode", and type the structure name HRTFactory (for 1.10.x) or HRTFactory11 (for 1.11+ and 1.12) in the dialog.
   • It's suggested NOT to rotate the structure to avoid some misplacing or command-related issues.
     
   
   
5. Click on the "Load" button on the dialog, and there should be cuboid boundaries showing above the structure block.
   
6. Open the dialog again, and click on the "Load" button. Then, you may see the Factory structure loaded in your map!
   

Copyright Issues

• You credit me as the provider of this tool.
  
• No commercial use.