Hello guys,

This project is about a working 3D scanner which I built together with my brother PsychoGear.

The scanner is able to scan complex 3D objects with the dimension of 8x8x8 blocks and to save them
as electronic informations in a hard drive.

All blocks of the 3D object must be movable and shall be put under power. The remaining voids around the
3D object must be filled with glass.

The scanner divide the 3D object into individual lines, which will be read and displayed immediately on an 8 pixel wide display. After the lines have been scanned, they will be reassembled in the assembly station.

The user can start and reset the scanner at every time of the scanning process, and he can set the scanner into sleep mode or wake him up.

The user is able to switch between all layers of the current and saved scan progress, and 1 minute after he changed the last time the layer, the display will jump back to the current layer of the scanning progress.

I think this are all information about this project, i have here a video to show how it works:



A world-download will follow soon, and thank you for your interest,

Derya001