WD Hunslet austerity 0-6-0ST

The Hunslet Engine Company Austerity 0-6-0ST is a steam locomotive designed for shunting. The class became the standard British shunting locomotive during the Second World War, and production continued until 1964 at various locomotive manufacturers. The 48150 class were built for the Guest Keen Baldwins Iron & Steel Company in 1937, being an enlarged version of a design dating from 1923. These developed into the 50550 class of 1941–42, with various modifications.
At the outbreak of the Second World War, the War Department had initially chosen the LMS 'Jinty' 3F 0-6-0T as its standard shunting locomotive, but was persuaded by Hunslet that a simplified version of their more modern 50550 design would be more suitable. The first locomotive was completed at their Leeds works at the start of 1943.

WD Austerity 2-8-0

The War Department (WD) "Austerity" 2-8-0 is a type of heavy freight steam locomotive that was introduced in 1943 for war service. A total of 935 were built, making this one of the most-produced classes of British steam locomotive. The Austerity 2-8-0 was based on the LMS Class 8F, which until that point had been the government's standard design. Various modifications were made to the 8F design by R.A. Riddles in order to prioritise low cost over design life. These included a boiler of simpler construction which was parallel rather than tapered and a round-topped firebox rather than a Belpaire firebox. The firebox was made of steel rather than the rarer and more expensive copper.

The North British Locomotive Company (NBL) of Glasgow built 545 (split between their two works at Hyde Park and Queen's Park) and the Vulcan Foundry (VF) of Newton-le-Willows, Lancashire, built 390. North British also built a larger 2-10-0 version.

WD Austerity 2-10-0

The War Department (WD) "Austerity" 2-10-0 is a type of heavy freight steam locomotive that was introduced during the Second World War in 1943. The Austerity 2-10-0 was based on the Austerity 2-8-0, and was designed to have interchangeable parts by R.A. Riddles. It had the same power output as the 2-8-0 but a lighter axle load, making it suitable for secondary lines. It had a parallel boiler and round-topped firebox. While the 2-8-0 had a narrow firebox, the 2-10-0 had a wide firebox placed above the driving wheels. This arrangement was common in the United States (e.g. the USRA 0-8-0) but unusual in Britain, where wide fireboxes were usually used only where there was a trailing bogie, e.g. in 4-4-2 and 4-6-2 types. These were the first 2-10-0 locomotives to work in Great Britain, and the first major class of ten-coupled engines — they had been preceded by two 0-10-0 locomotives; the Great Eastern Railway's Decapod and the Midland Railway's Lickey Banker. The 2-10-0 wheel arrangement was later used by Riddles when he designed the BR standard class 9F. This, too, had a wide firebox placed above the driving wheels.