Published Dec 1st, 2012, 12/1/12 11:47 am
- 1,583 views • 1 today
- 113 downloads • 0 today
2
This build was inspired by the Alhambra, a beautiful palace and fortress complex in Spain.
I still need to do a lot of work on the interior, and start the exterior of the building. Unfortunately due to me not planning it to be this big, there are lots of areas that look awkward that I also have to fix.
This is first attempt at building anything of a decent size, so please leave some feedback.
If you don't know what the Alhambra is, have a look at the wikipedia page
I still need to do a lot of work on the interior, and start the exterior of the building. Unfortunately due to me not planning it to be this big, there are lots of areas that look awkward that I also have to fix.
This is first attempt at building anything of a decent size, so please leave some feedback.
Additional Notes
If you don't know what the Alhambra is, have a look at the wikipedia page
| Progress | 60% complete |
| Tags |
1698124
2
ChikenEater26
ILoveMinecraft6786546
EuphoriaLuna
Innoventions
RaleDesign
MineDesigns
H4racan
Have something to say?
I wanted to see how much it would cost as a 3D print model: quite a lot! I made a smaller scale version for printing, here, but I suspect the walls are too thin and they'd reject actually making it (it could also benefit from being moved to the ground level, as the base would then be thick enough to print).
(BTW, it's spelled Alhambra.)