- 931 views, 2 today
- 31 downloads, 0 today
68
For More Information About The Union for Technological Development:
www.minecraftforum.net/topic/317591-utd-union-for-technological-development/
Created by Zucarok for the UTD. (CAD2)
Created by larslolxz. (CAD2+)
A brand new type of adding architecture by the UTD, based on the original CAD1 (unreleased) that was featured on several UTD products, such as the UTD A1 and A2.
CAD2 had some serious design issues, now switched to CAD2+. It is also more compact.
This is an open utility, anyone can use it as long as they give credit. If you see someone using it without due credit, please report them to this account via PM.
www.minecraftforum.net/topic/317591-utd-union-for-technological-development/
Created by Zucarok for the UTD. (CAD2)
Created by larslolxz. (CAD2+)
A brand new type of adding architecture by the UTD, based on the original CAD1 (unreleased) that was featured on several UTD products, such as the UTD A1 and A2.
CAD2 had some serious design issues, now switched to CAD2+. It is also more compact.
This is an open utility, anyone can use it as long as they give credit. If you see someone using it without due credit, please report them to this account via PM.
| Progress | 100% complete |
| Tags |
1 Update Logs
Update #1 : by UTD Projects 06/26/2011 1:16:36 pmJun 26th, 2011
Updated to CAD2+ Architecture
tools/tracking
46934
2
utd-utilities-cad2-compact-adder-design
SculkwolfContent
GalaxyCat24
Daralexen
Aelle
Panda_Shark
Papa Enny
Adrestio
Acul0s
RCZ2000
1368
Create an account or sign in to comment.
www.planetminecraft.com/project/2-wide-tileable-full-adder/
And there's also this which has it down pat for speed:
www.planetminecraft.com/project/efficient-full-adder/
Its a lot more efficient to have it 2 wide and tiling. Of course, if you're looking for speed then yours is probably preferred.
Can I also point out that you can compact your design rather easily.
Firstly, the first half adder can have part of the middle bit taken out. One torch can power both of the gates.
Secondly, you need to get rid of the repeater and put a redstone torch there. Then get rid of that block, and put another torch on the other HA to power the carry out. Also get rid of the torch at the bottom.
Finally, the carry out on this does not work at all, given that you can't power through a block unless there is a repeater on one or both sides. You have a repeater at one point, but you lack in on the other.
Plus, the way you currently have it set up, the second HA doesn't work in the slightest.
Now, don't take this the wrong way, because I'm not trying for that. I'm trying to tell you how it's wrong, and how you can fix it. More constructive criticism than anything else. So don't complain, say thanks.
plus, your adder is 182 blocks big (7x2x13)
and ours is 4x5x3 not counting redstone, and 5x6x4 counting it. which is less. 5x6x4 = 120
plus, you did not create the one which is faster, CX gamer did. and you could have at least downloaded the schematic and read the update log which says "fixed some major design issues", namely all your faults. it's actually completely remade.
and even if you count a layer around it it's 6x7x4 (not the top, that's not the issue), which is 168 blocks. the only way your argument of your adder being more compact is valid is if the extra layer is added to all sides counting redstone, which is unneeded. thus, your arguments are all invalid.
except the one about his being faster, which is not the issue. this one is made for size.
You don't mention demorgan every time you build an AND gate either so yeah. I just build stuff that's free to be used, to help the community, not for my own glory.
So, you're going to take my attempt at being nice for once and shove it up somewhere I don't care to mention?
We will have another one by the end of the week.
We may be competitors but that doesn't mean I can't assist in pointing out errors/improvements.