This is my first Minecraft Computer. It is a 2-bit adder and can add up and display numbers up to 6. I will make a YouTube video about it.
Specs:
Name: iCreeper 1
Architecture: 2 bit
CPU: EnderCore e1200 1.5 hz
Memory: 8 bits
Graphics: JebVidia MTX 4060 (7-segment display)

BUTTONS (input)

RESET
The reset button resets all values to 0. After a few seconds, all status lights should be off except for "Reset"

Numbers 0-3
Starting Numbers

Numbers 0-3
Number you want to add to the starting number

On/OFF lever
When it is set to off, all lights will turn off. You will not be able to change input until it is set to ON

INDICATORS (output)
RESET
Indicates that the system is reset and ready to use

In Use
This means that you have pressed a button since your last reset.

Display
Displays numbers from 0 to 6. It only shows 0 if bot inputs are only set to 0

WAITING
The computer should usually take less than 7 seconds to show a result on the lights. (This is mainly due to the travelling wires; The CPU takes less than 1 second to calculate). During this time, the display may flash to different numbers.

PROGRESS

Build CPU ✅
Build BIOS ✅
Connect inputs 0-3✅
Connect Inputs 4-7✅
Build Display✅

BUGS

If something doesn't work as intended, comment and I will try to fix it.