20
Today ill be showing you how to make a simple mob spawner that got me tons of loot.
Step One:
Get high up in the air
at least 20 blocks high.
Step Two:
Make a 14x14 square
Put a 1 high wall all around the edge
And add water to each corner and put a 2x2 hole in the middle .
Now it should look like this.
Step Three:
Add a 6x6 block to each side and it will look like this.
Step Four:
Add a 3 high wall all around the edges and it will look like this .
Step Four B: if you want 4 high for more loot it is ok but i do three because of the enderman move blocks.
Step Five:
Add a roof that is at least 1 full block and put torches on top like this.
Step Six (optional step)
Add a second level and put a 5x5 hole were the 4x4 hole should be.
Step Seven:
Add a platform about 12x12 on the bottom and put a 1 high border with torches on each corner
and then you will get lots of loot like this when mobs fall down.
Final Step:
go to the top and make it so that no light gets in to the spawner
In the end it should look like this
I hope this was helpful
PS. If no monsters are spawning you are either too far away or there is a mob glitch sometimes the first time you use it on super flat you need to spawn atleast 3 mobs in the spawner for it to work i didn't but i have heard of the problem happening.
please leave a diamond and a favorite if you like it
Tags |
tools/tracking
1198117
6
simple-mob-spawner-minetorials-simple
Create an account or sign in to comment.
I hope in your building it wasn't messed up that bad