Published Dec 29th, 2012, 12/29/12 8:17 am
- 633 views • 2 today
- 48 downloads • 1 today
6
The APower1 GPU
It's notreallya GPU like in real life, but because it looks like one and it also processes signals to the display. This is just a concept, obviously you probably won't ever need to use something like this or build one in survival, but I liked the idea, so I built it :D
What it does?
It converts 64 individual redstonecables to 23cables.
The cables then get back reconverted to 64 pixels to be shown on the display.
How to start it?
When you fly to the control panel (the one with a button, lever and 4 lights) you just put the power on and then click RESTART GPU. After a couple seconds the machine will run.
Problems you may run into when testing this out...
Because it's so big, when you are too far away from one component the chuck with the redstone gets unloaded and the whole machine starts acting weird. It work fine when you put your render distance on Far +32 in OptiFine. Otherwise just put it on far. I also recommend to use more than 1GB of ram.
If you see that one of the chips with the clocks inside is not responding, just open it and the stuck repeater will get updated and the machine will runnormal again.
It's notreallya GPU like in real life, but because it looks like one and it also processes signals to the display. This is just a concept, obviously you probably won't ever need to use something like this or build one in survival, but I liked the idea, so I built it :D
What it does?
It converts 64 individual redstonecables to 23cables.
The cables then get back reconverted to 64 pixels to be shown on the display.
How to start it?
When you fly to the control panel (the one with a button, lever and 4 lights) you just put the power on and then click RESTART GPU. After a couple seconds the machine will run.
Additional Notes
Problems you may run into when testing this out...
Because it's so big, when you are too far away from one component the chuck with the redstone gets unloaded and the whole machine starts acting weird. It work fine when you put your render distance on Far +32 in OptiFine. Otherwise just put it on far. I also recommend to use more than 1GB of ram.
If you see that one of the chips with the clocks inside is not responding, just open it and the stuck repeater will get updated and the machine will runnormal again.
| Progress | 100% complete |
| Tags |
1793328
2
NJRaider13
Miimimiimi
Muravejchik
Have something to say?