Boeing 747-200F

Hello,

Again a new project, this time it's the Boeing 747-200F in the Saudia livery. Below you'll find some information about the 747-200 in general from Wikipedia. I hope you guys like it, and don't forget to drop some diamonds.

747-200

While the 747-100 powered by Pratt & Whitney JT9D-3A engines offered enough payload and range for US domestic operations, it was marginal for long international route sectors. The demand for longer range aircraft with increased payload quickly led to the improved -200, which featured more powerful engines, increased MTOW, and greater range than the -100. A few early -200s retained the three-window configuration of the -100 on the upper deck, but most were built with a ten-window configuration on each side. The 747-200 was produced in passenger (-200B), freighter (-200F), convertible (-200C), and combi (-200M) versions.

The 747-200B was the basic passenger version, with increased fuel capacity and more powerful engines; it entered service in February 1971. In its first three years of production, the -200 was equipped with Pratt & Whitney JT9D-7 engines (initially the only engine available). Range with a full passenger load started at over 5,000 nmi (9,300 km) and increased to 6,000 nmi (11,000 km) with later engines. Most -200Bs had an internally stretched upper deck, allowing for up to 16 passenger seats. The freighter model, the 747-200F, could be fitted with or without a side cargo door, and had a capacity of 105 tons (95.3 tonnes) and an MTOW of up to 833,000 lb (378,000 kg). It entered service in 1972 with Lufthansa.The convertible version, the 747-200C, could be converted between a passenger and a freighter or used in mixed configurations, and featured removable seats and a nose cargo door. The -200C could also be fitted with an optional side cargo door on the main deck.

Make sure you leave a Diamond
You are free to use my designs on your world or server as long as you give me credit for the design itself. Also if you post it anywhere on the internet make sure you credit me for the design either link to this project itself or to my PMC profile in general. And please do NOT re-upload these builds to PMC without my express permission. Thank you for understanding.