Published May 5th, 2021, 5/5/21 3:39 pm
- 4,859 views, 7 today
- 372 downloads, 1 today
2,233
Hello,
this is a machine used to mechanically pick cotton.
To do this, it has many rotating, moisturized spindles in each picker head which wind up the cotton and pull it out of the plant. A set of quickly rotating disks swipes the wound up cotton off the spindles. The cotton is then sucked into a basket through vacuum tubes.
The harvester I built also is equipped with a baler, so the harvester can build cotton modules while harvesting. When a bale is finished it can be carried on the tail gate until the harvester reaches an advantageous location where it can dump the bale onto the ground.
Enjoy!
this is a machine used to mechanically pick cotton.
To do this, it has many rotating, moisturized spindles in each picker head which wind up the cotton and pull it out of the plant. A set of quickly rotating disks swipes the wound up cotton off the spindles. The cotton is then sucked into a basket through vacuum tubes.
The harvester I built also is equipped with a baler, so the harvester can build cotton modules while harvesting. When a bale is finished it can be carried on the tail gate until the harvester reaches an advantageous location where it can dump the bale onto the ground.
Enjoy!
Progress | 100% complete |
Tags |
tools/tracking
5107193
2
john-deere-cotton-harvester
Create an account or sign in to comment.
I use World Edit and never had any problems.
What you can do is get World Edit as a mod or a plugin (if you are running a server), paste the schematic in a temporary world using World Edit, make a new schematic of that build using Litematica and then you should be able to use that new schematic with Litematica (since it was made with Litematica).
No problem ^^
Tell me if it worked!