Non command block speedomiter

All I did was get bored and decided to make one of these. I know there are already some speedomiters already out there, however, everything you see before you is of my own creation, I have not purposfully stolen off anyone.

How to use:
1. Decide on the speed test to be done, running, walking or horse riding.
2. Press the button in the middle to make sure it is fully reset, if the piston is activated and there is no items in the first hopper, then it is good to use.
3. Move over the first trip wire, which will activate the run, and continue untill you have passed the second trip wire, and it doesnt matter wich side you do first.
4. Look inside the first hopper which is parrallel to the button in the middle, to see your score, the less items in the hopper, the faster the time. BE AWARE THAT THIS IS NOT AN ACTUAL M/S SPEED, RATHER BLOCKS/S SPEED!
5. Reset the device by pressing the button.

How it works:
1. The trip wire sends a redstone signal to the lowest piston, which in turn creates a 1 tick pulse. This one tick pulse activates a T-flip flop which starts the hopper redstone clock.

2. The clock then outputs a regular pulse which activates the dropper tower and deposits all the items into the uppermost hopper.

3. The items are held in that place by the top circuit powering the next piston, and combined with the direction of the hoppers placement, means it will stay there untill the top circuit is used.

4. The top circuit is attached to another T-flip flop which activates/deactivates the second hopper, so when the button is pressed, the hopper gets unpowered. This process does not require a second press of the button as when the hopper has run out of items, it will activate torch (via the comparitor), which activates the T-flip flop again. When not in use, this circuit should remain on!

Hope you have fun using this device, and you will be seing more from me!

Maxo11x


Youtube: www.youtube.com/user/Maxo11x

Twitch: www.twitch.tv/Maxo11x

Twitter: @maxo11x
Skype: Lizarto1