Maps Piston

UTD "Phantasm" 2-way repeater

• • 8/19/11 10:54 pm • 3 logs
  • 1k views • 0 today
  • save_alt 32 downloads
Progress
90% complete
  • 0
  • 0
  • 3
UTD Projects
Lvl 52 • Grandmaster Crafter
69
For More Information About The Union for Technological Development:
http://www.minecraftforum.net/topic/317591-utd-union-for-technological-development/

Created by Blackberry Pie for the UTD

Repeater: (7x5x4)
Repeats in 0-ticks both off->on=on and on->off=off.

Inverter: (8x5x4) [Theoretical - Redstone glitches ingame]*
Inverts in 0-ticks both on->off=on and off->on=off.*

Special thanks to Jontis_00 for his 0-tick "Snap" repeaters:
http://www.planetminecraft.com/project/utd-worlds-first-no-delay-repeaters/

If you have problems, make sure the pistons are pushing WEST and SOUTH.

Sometimes the Phantasm will not work for no apparent reason; this has something to do with it's location, try putting the whole unit inside one chunk

3 Update Logs

Update #3 : by UTD Projects 08/19/2011 10:54:01 pmAugust 20, 2011 @ 2:54 am UTC

Removed inverter, as it is currently way too glitchy. Updated Repeater and troubleshooting.
LOAD MORE LOGS

More like this

  Have something to say?

BestFactionServer
• 07/30/2011 8:09 am
• Level 3 : Apprentice Meme
I just tryed the repeater over a distance of 500 blocks and the off->on does not work as it should (it has to ripple down to the end before you can send another signal), but the on -> off works fine.
I also discovered that it does not like fast pulses (breaks and started psyching out on m e :S)

I have tested it it west and south too, but no success
1
fibonatic
• 08/20/2011 9:22 pm
• Level 41 : Master Electrician
I found the same dysfunction. I compared it with normal repeaters and off->on gives an 2 tick delay (but on->off none).
PS: I also tried to make one myself, but still got some delay with off->on (9 ticks after 12 "repeaters") so 3/4 tick delay.
1
Jontis_00
• 07/30/2011 5:06 pm
• Level 1 : New Miner
So make each repeater reset it self right after it extend?
1

Welcome