5
This is a maze trap. An exit faker.
What you need.
2 sticky piston. some redstone. A stone pressure plate. And your normal resources.
Step 1 : Place A piston on the ground.
Step 2 : Put one of your resources onto the piston.
Step 3 : Place 4 blocks on the side.
Step 4 : Put a sticky piston on the top block facing down.
Step 5 : Do the same as step 2.
Step 6 : Remove the blocks on your side
Step 7 : Where the block on the bottom piston is. Put a block next to it.
Step 8 : Put a pressure plate on that block. pad.
Step 9 : Put redstone under the pad. block ___
Step 10 : Make a redstone in the same direction as the piston. redstone redstone | |
Step 10 (2) : Copy that diagram.
Step 11 : Where the top piston block is. Put a block to the side.
Step 12 : Copy the image with the step things.
Step 13 : Link it with redstone.
AND BAM. The first of my maze traps.
What you need.
2 sticky piston. some redstone. A stone pressure plate. And your normal resources.
Step 1 : Place A piston on the ground.
Step 2 : Put one of your resources onto the piston.
Step 3 : Place 4 blocks on the side.
Step 4 : Put a sticky piston on the top block facing down.
Step 5 : Do the same as step 2.
Step 6 : Remove the blocks on your side
Step 7 : Where the block on the bottom piston is. Put a block next to it.
Step 8 : Put a pressure plate on that block. pad.
Step 9 : Put redstone under the pad. block ___
Step 10 : Make a redstone in the same direction as the piston. redstone redstone | |
Step 10 (2) : Copy that diagram.
Step 11 : Where the top piston block is. Put a block to the side.
Step 12 : Copy the image with the step things.
Step 13 : Link it with redstone.
AND BAM. The first of my maze traps.
Tags |
tools/tracking
424872
6
maze-trap-1
Create an account or sign in to comment.