• 3/14/25 4:29 am
- 1.6k views • 6 today
- save_alt 132 downloads
- Compatibility
- Minecraft 1.21
- Changes include
250
Fence Tweaker is a datapack that allows you to add or remove connections for all types of fences, walls, glass panes and iron bars. This allows for building tricks that would normally be impossible in survival Minecraft.
COMPATIBILITY
Fence tweaker works in Minecraft Java 1.21.5+. It should be compatible with most other datapacks and mods.
GETTING STARTED
First of all you need to craft a Fence Tweaker using 3 iron bars and 2 wooden fences (can be any wood type), as shown below.
While holding a Fence Tweaker, right-click on a fence, stone wall, glass pane or fence gate to change its properties. More info is listed below.
FENCES
Right clik the center post with a Fence Tweaker to add a connection to its side. Right-click a connection to remove it.
If two fence blocks are adjacent, adding/removing a connection of one fence will automatically add/remove the connection for the adjacent fence (see below). To create individual connections, shift + right-click the fence instead.
GLASS PANES AND IRON BARS
Glass panes and iron bars work similarly to fences: right-click the block with a Fence Tweaker to add or remove connections.
Block adjacency for glass panes and iron bars is handled the same as for fences: connections are added/removed from both blocks, unless you shift + right-click.
WALLS
Modifying wall connections is a bit more complicated. Walls have 2 types of connections: low and tall. They also have a central pillar that can be removed.
Right-click the central pillar with a fence tweaker to add a low connection to its side. Right-click a connection on the top to change its height from low to tall or vice versa. Right click a connection on the side to remove it.
As with fences, changing a connection for a wall will also change it for the adjacent wall unless you shift + right-click the block. There is one exception: if you shift + right-click the central pillar, Fence Tweaker will attempt to remove the center instead.
It is also possible to add or remove the central pillar. If the wall has no center, right-clicking it around the middle of the block will add the center pillar.
If the wall has a center, right-clicking the central pillar on the top or bottom will attempt to remove it. If you want to remove the center from the side you have to shift + right-click it; just right-clicking will create a connection.
It is always possible to add a central pillar but it's not always possible to remove it.
FENCE GATES
Fence gates have two possible heights: low and tall. If you shift + right-click a fance gate with a Fence Tweaker, it will toggle between the two heights.
BLOCK UPDATES
Placing any block next to a modified block can remove custom connections. This is why it's recommended to place all blocks in your build before you modify any fence connections.
This is an unfinished proof of concept datapack. If you have any feedback, please leave it in the comment section.
COMPATIBILITY
Fence tweaker works in Minecraft Java 1.21.5+. It should be compatible with most other datapacks and mods.
GETTING STARTED
First of all you need to craft a Fence Tweaker using 3 iron bars and 2 wooden fences (can be any wood type), as shown below.
While holding a Fence Tweaker, right-click on a fence, stone wall, glass pane or fence gate to change its properties. More info is listed below.
FENCES
Right clik the center post with a Fence Tweaker to add a connection to its side. Right-click a connection to remove it.
If two fence blocks are adjacent, adding/removing a connection of one fence will automatically add/remove the connection for the adjacent fence (see below). To create individual connections, shift + right-click the fence instead.
GLASS PANES AND IRON BARS
Glass panes and iron bars work similarly to fences: right-click the block with a Fence Tweaker to add or remove connections.
Block adjacency for glass panes and iron bars is handled the same as for fences: connections are added/removed from both blocks, unless you shift + right-click.
WALLS
Modifying wall connections is a bit more complicated. Walls have 2 types of connections: low and tall. They also have a central pillar that can be removed.
Right-click the central pillar with a fence tweaker to add a low connection to its side. Right-click a connection on the top to change its height from low to tall or vice versa. Right click a connection on the side to remove it.
As with fences, changing a connection for a wall will also change it for the adjacent wall unless you shift + right-click the block. There is one exception: if you shift + right-click the central pillar, Fence Tweaker will attempt to remove the center instead.
It is also possible to add or remove the central pillar. If the wall has no center, right-clicking it around the middle of the block will add the center pillar.
If the wall has a center, right-clicking the central pillar on the top or bottom will attempt to remove it. If you want to remove the center from the side you have to shift + right-click it; just right-clicking will create a connection.
It is always possible to add a central pillar but it's not always possible to remove it.
Rules for removing the central pillar (click to expand)
Whether the center can be removed depends on the wall's connections. Normally the center pillar covers connections and removing it could cause visual bugs, as shown below.
The central pillar can be removed if every connection is covered by other connections. Examples:
The two connections are perpendicular and don't cover each other. The center can't be removed.
The three connections are all the same height, therefore they cover each other. The center can be removed.
The tall connection is not covered by the two lower connections. The center can't be removed.
The lower connection is covered by two perpendicular tall connections. The center can be removed.
The lower connection on the right is not fully covered by the two tall connections. The center can't be removed.
The central pillar can be removed if every connection is covered by other connections. Examples:
The two connections are perpendicular and don't cover each other. The center can't be removed.
The three connections are all the same height, therefore they cover each other. The center can be removed.
The tall connection is not covered by the two lower connections. The center can't be removed.
The lower connection is covered by two perpendicular tall connections. The center can be removed.
The lower connection on the right is not fully covered by the two tall connections. The center can't be removed.
FENCE GATES
Fence gates have two possible heights: low and tall. If you shift + right-click a fance gate with a Fence Tweaker, it will toggle between the two heights.
BLOCK UPDATES
Placing any block next to a modified block can remove custom connections. This is why it's recommended to place all blocks in your build before you modify any fence connections.
This is an unfinished proof of concept datapack. If you have any feedback, please leave it in the comment section.
More like this
Reverse Craft - Fences+Walls & GatesMinecraft 1.14 - 1.18 Crafting Recipe Data Pack
GrimReaperCZ
1/8/22 2:42
• posted 6/27/20 7:30
4.5k 205x 374
Sand hovers over fences and walls - HangsandMinecraft 1.16 - 1.17 Game Mechanic Data Pack
cookedporkbacon
•3/1/21 11:56
1.2k 31 8x 396
6559241
119
wply
Have something to say?