1 Bit stackable memory V1.1

side note: 1 bit stackable memory is the best name I could come up with for this, although it does not have a completely valid name, it is still worthwhile.

this system consists of three elements:

1. the 7 tick pulse limitor: you can make your own one of these, I just left it in there to remind people that it requires a 7 tick input

2. the transfer lines: this line of repeaters is what transfers the signal from row to row. You can put as many memory banks as you want in a row, but you need this transfer line to take the 7 ticks from one row to the next.

3. the memory bank: a simple piston RS-NOR latch with a pretty input on top it what you've got here. you might also see the line that transfers the signal along the row. if the memory banks are lined up in a row end to end, you can get 4 memory banks in before you need a repeater (though this extra tick is always easy to fix if you know what you're doing)

If you don't understand exactly what is going on you can check out this project here:
www.planetminecraft.com/project/water-printer-1886493/
for an example of how this is used.

as always, tell my how shitty this is in the comments below so I know what to change.