• 3/10/12 9:43 am
- 542 views • 0 today
- Progress
- 95% complete
- 1
- 0
- 4
0
Hello Fellow Redstoners,
I present you my partially complete Router that i've made by myself.
It has 4 ports for NIC's (Network Interface Cards) and a Huge Port
for the ISP!
The router shifts 2 byte packet; 8 bit Data, 5 Bit Instruction, 3 bit Local IP.
The Local IPs are static but can be change by 12 levers (Takes ages to change and get right).
It uses serial to communicate though the router and has 4 busses to the port, 2 send and 2 recieve.
I spent the last few days making it look good and adding the ISP Port, I found the project really fun and its still not over...
On request I will write a more indepth explanation on the Router.
Pics Below:
Socket to connect to router:
Front of Network Interface Card:
Front of Router:
Top Router (4 7 segs now):
Control Panel of Router:
To be seen and progress done on it warp to J_Router!
This was made on the RDF Build Server!
therdf.net
I present you my partially complete Router that i've made by myself.
It has 4 ports for NIC's (Network Interface Cards) and a Huge Port
for the ISP!
The router shifts 2 byte packet; 8 bit Data, 5 Bit Instruction, 3 bit Local IP.
The Local IPs are static but can be change by 12 levers (Takes ages to change and get right).
It uses serial to communicate though the router and has 4 busses to the port, 2 send and 2 recieve.
I spent the last few days making it look good and adding the ISP Port, I found the project really fun and its still not over...
On request I will write a more indepth explanation on the Router.
Pics Below:
Socket to connect to router:
Front of Network Interface Card:
Front of Router:
Top Router (4 7 segs now):
Control Panel of Router:
To be seen and progress done on it warp to J_Router!
This was made on the RDF Build Server!
therdf.net
More like this
'AlphaRo' - Redstone RouterRedstone Device Map
MasterAdamonia
2/2/13 1:00
• posted 1/15/13 4:00
950x 13
alexgaleIII657541
2
The Old Relic
HPBFA Creator
pakalewffi
Have something to say?