- 3,414 views, 26 today
- 843 downloads, 5 today
111
Presenting the Latest Release from the Redstone Farm Series!
The Royal Village Farms - Multi-Farm and Storage System
The latest release from the Redstone Farm series is the Royal Village Farms, a complete Multi-farm complex. Updated, it now includes the integrated storage system! This model is really six systems in one! It forms the heart of the Turtle Bay Farm District and was the beginning of Turtle Bay along with the Warehouse! It was built completely on-site as you see it!
- Pumpkin and Melon farm: Fully automatic pumpkin and/or melon farm. This is a brand new design we built for the latest Turtle Bay Upgrade. There are four plants each on two levels for a total of eight pants. ATM we have pumpkins on one level and melons on the other. Controls for the system are in the rear (west side) of the farm. Unfortunately, space limitations prevented me from making a 'one-touch' control system for this farm. SO, there is a switch for each piston where you can disable an/all of the plants production. Turn it on, production is halted for that bay, turn it off to produce crop...
- Four level 'flushing' crop farm: This is a four level, 'you plant' crop farm. We call it a flushing farm, because we use a low tech method of flushing all the mature crops to the basement, where the crops are collected. You can plant any crops you like such as potato, carrots, wheat, and beetroot. In addition, there are some jungle logs for planting cocoa beans. Let your crops fully mature and press the button on the top level to start the water flow. Wait a few seconds to flush the crops and press again to cause the water to recede.
- Two level-eight bay Animal farm (cows, pigs, sheep): This farm uses the 1-block overcrowding rule to cause the animals to die when there numbers exceed 25 per block. So when you feed the animal in the already full block, it produces an offspring which causes an adult animal to die. The infant offspring are immune from the rule, so only adults die off. To operate, press the button to the left of the bay you want to feed. water will be dispensed and the animals will rise to the surface. step up and feed them their favorite food until the hearts stop appearing. It gets fun when you get to the pigs and your sound is turned on... they seem to make more noise than the others.
- Raw Chicken farm: The name says it all! Well, not really... The farm uses the 1-block overcrowding rule to automatically produce all the raw chicken feathers, or eggs you could want. The controls are in the basement. There is a switch to select eggs vs. chicken and feathers and one to enable or disable output altogether.
- Sweetberry farm: Fully automatic and run by some very wily foxes. Control of the collection of sweetberries is in the basement level.
- Villager Wheat farm (produces mostly bread): This fully automatic villager wheat farm does NOT produce much wheat. However, it will provide a steady supply of bread, when the resident villagers are in the mood. All access to the basement level is via a spruce door on the south side of the villager hut. There is a collection on/off switch in the basement right at the bottom of the ladder.
There is a companion model, the Royal Village Farms Barn and storage system, for this installation that provides storage for all the farms output. We are preparing it for release. Stay tuned!
How to install and use this model...
Download and Contents:
This model download consists of a single structure block .nbt file. Download to a safe location and follow the steps below.
Structure Block File Installation:
Single Player Client:
Open the Windows File Explorer and type the following into the address bar: %APPDATA%\.minecraft\saves and press enter. Next, open the desired world save folder. Then open the \generated\minecraft\structures\ folder. Copy the .nbt file to here.
Multiplayer Server:
Locate and open the world save directory where you want to install the model. Next, open the desired world save folder. Then open the \generated\minecraft\structures\ folder and copy the .nbt file to here.
When you are done, verify that the .nbt file was copied to correct folder.
In-Game model Installation:
Once the all the .nbt files from the LitematicaSinglePlayerFix and the structures folders have been copied to the right place (see above),
1) log into the game in CREATIVE mode and ensure you have permissions to place structure blocks (op perms),
2) stand in the center of the Northwest corner of area you want the model installed, the model requires a minimum foot print of 35 blocks east-west and 47 blocks north-south, and a total of 30 blocks tall (plus 6 blocks underground),
3) type /give <PlayerName> stucture_block,
4) replace the block directly under your feet with the structure block,
5) right-click the structure block,
6) set the structure name is set to 'royal_inn_farms4_35ewx47nsx30h_nwcrnr',
7) set the Relative Position boxes to the following: '0 -6 0',
8) Ensure the button on the lower left corner is set to 'LOAD' mode,
9) Ensure that 'Include Entities' is set to 'ON',
10) click done,
11) right-click the structure block again,
12) Click the 'LOAD'
13) click done,
14) You should see an outline of the model, ensure the placement and rotation is correct,
15) repeat steps 11 through 13 above to load the building with all the entities,
16) more than likely you will need to repair the rails under the sweetberry farm...
When you are finished, you can delete the structure block, or leave it in place...
This model download consists of a single structure block .nbt file. Download to a safe location and follow the steps below.
Structure Block File Installation:
Single Player Client:
Open the Windows File Explorer and type the following into the address bar: %APPDATA%\.minecraft\saves and press enter. Next, open the desired world save folder. Then open the \generated\minecraft\structures\ folder. Copy the .nbt file to here.
Multiplayer Server:
Locate and open the world save directory where you want to install the model. Next, open the desired world save folder. Then open the \generated\minecraft\structures\ folder and copy the .nbt file to here.
When you are done, verify that the .nbt file was copied to correct folder.
In-Game model Installation:
Once the all the .nbt files from the LitematicaSinglePlayerFix and the structures folders have been copied to the right place (see above),
1) log into the game in CREATIVE mode and ensure you have permissions to place structure blocks (op perms),
2) stand in the center of the Northwest corner of area you want the model installed, the model requires a minimum foot print of 35 blocks east-west and 47 blocks north-south, and a total of 30 blocks tall (plus 6 blocks underground),
3) type /give <PlayerName> stucture_block,
4) replace the block directly under your feet with the structure block,
5) right-click the structure block,
6) set the structure name is set to 'royal_inn_farms4_35ewx47nsx30h_nwcrnr',
7) set the Relative Position boxes to the following: '0 -6 0',
8) Ensure the button on the lower left corner is set to 'LOAD' mode,
9) Ensure that 'Include Entities' is set to 'ON',
10) click done,
11) right-click the structure block again,
12) Click the 'LOAD'
13) click done,
14) You should see an outline of the model, ensure the placement and rotation is correct,
15) repeat steps 11 through 13 above to load the building with all the entities,
16) more than likely you will need to repair the rails under the sweetberry farm...
When you are finished, you can delete the structure block, or leave it in place...
More from the Redstone Farm Series...
We hope you like this model, please check out the other models in the BFMC Redstone Farm series!
Automatic GlowBerry/Dripstone Farms
Automatic Kelp Farm
Automatic Sugarcane and Bamboo Farms
Automatic Cactus Farms
Automatic Wool Farm and Storage System
Royal Village Farms - Multi-farm
Royal Village Honey Farm
Automatic GlowBerry/Dripstone Farms
Automatic Kelp Farm
Automatic Sugarcane and Bamboo Farms
Automatic Cactus Farms
Automatic Wool Farm and Storage System
Royal Village Farms - Multi-farm
Royal Village Honey Farm
| Progress | 100% complete |
| Tags |
1 Update Logs
Update #1 : by DiggerMcGee 02/22/2024 10:40:07 amFeb 22nd
updated download now includes the Royal Village Farms Barn and Storage system, new photos, and updated text. Hope you enjoy!
Digger
Digger
tools/tracking
6196259
2
royal-village-farms-automatic-multi-farm-in-1-20-2-free-download
Molitoola
StalkerNugget
r3dleaf
coscat
R31LZ0N
GalaxyCat24
20w14infinite
The Great Magispeller
Monarque
Kypickle
RoyalSymphoney
Bertoxx
Create an account or sign in to comment.
Yes, everything should be automatically collected and sent to storage. By default I have collection turned off. So, you need to verify that your selected crop or farm is enabled, controls are in the basement.
The only potential bug is the rail tracks for the sweetberry farm. I have noticed that the rails are finicky in their placement. The rails on the hoppers are often missing and need to replaced. place a powered rail on the end hopper and a regular rail on the next in hopper. If any of the tracks are curved, they need to be replaced. Since you are a beginner I am assuming you do not have the Worledit plugin loaded, so you will probably need to do it by hand.