In-game operation of the machine is very simple. There is a single switch above a redstone lamp in the basement. This switch controls the production of honey and honeycomb. Simply flip the switch so the lamp is lit up. This will lock the dispensers and the hives will fill up. Once the hives are full, you can shut off the lamp. When you want to resume normal production, simply harvest the hives manually with a pair of shears or empty glass bottles.

Every once and a while, you will need to replenish the empty glass bottles and shears used by the system. There are three double-chests for bottles and one double-chest for depositing shears in the upper level. As long as there are bottles and shears in the chests, the system will function normally.

Installation:
How to Install the Royal Village Honey Farm in your world...

Download and extract all the files from the .zip file. You should see a ReadMe.txt file and the subfolders 'structure' which contains two .nbt files needed for the structure blocks.

First locate and open your server's world save directory. Next, open your plugin folder (<server_root)\<yourworld>\plugins\WorldEdit\schematics\ and copy all of the ".schem' files to this folder.

Structure Block Installation:

in the structures folder are two .nbt files:

farm_royalvillage_honey_15ewx17nsx18h_nwcrnr.nbt, and
royalvillagehoneyfarm_bees.nbt, (Only needed to load bees)

Single Player Client:
Open the Windows File Explorer and type the following into the address bar: %APPDATA%\.minecraft\saves and press enter. Next, open the desired world save folder. Then open the \generated\minecraft\structures\ folder. Copy the .nbt files to here.

Multiplayer Server:
Locate and open the world save directory where you want to install the model. Next, open the desired world save folder. Then open the \generated\minecraft\structures\ folder and copy the .nbt files to here.

When you are done, check that the .nbt files have been copied to correct folder.

In-Game Installation (Structure Block):
1) log into the game and select creative mode. If you are on a server, you may also need OP permissions.
2) Go to the northwest corner of the plot you want to install the model. you will need an area at least 19 blocks east/west by 8 blocks north/south at ground level to install and whatever heighth clearance for our selection.
3) Place a structure block in the ground directly below your feet.
4) right click the structure block and type;
  a. type 'minecraft:farm_royalvillage_honey_15ewx17nsx18h_nwcrnr',
  b. On the lower left of the screen, set the structure block to 'load' mode,
  c. set all the Relative Position boxes to the following: '0 -3 0',
  d. set Show Bounding Box to 'ON',
  e. set Include entities to 'off',
  f. select Done,
5) right click on the structure block again, and
  a. select load on the lower RIGHT part of the screen,
  b. click only once and then click Done to preview an outline of where the model will be installed.
  c. verify that the outline coincides with where you want the model installed.
6) Once you are satisfied with the location, select the structure block again
  a. Ensure that Include entities is set to to 'off'.and click 'Load' on the lower RIGHT part of the screen. the model should load.
  b. select Done,
  c. verify that the bees have been loaded. If not repeat the above steps on the structure inside the front entrance to the bee area.
7) After all this, you can either leave the structure block in place and cover it with carpet, or delete it and replace with another solid block.


let me know if you have any problems... Enjoy! If you like it, please leave a diamond and Subscribe!

Thanks, Digger

We hope you like this model, please check out the other models in the BFMC Redstone Farm series!

  Automatic GlowBerry/Dripstone Farms
  Automatic Kelp Farm
  Automatic Sugarcane and Bamboo Farms
  Automatic Cactus Farms
  Automatic Wool Farm and Storage System
  Royal Village Farms - Multi-farm
  Royal Village Honey Farm